PCI SIG Gen3 x8 Merged Design - Stratix V

From Intel FPGA Wiki
Jump to: navigation, search



The purpose of this page is to provide a link for the Stratix V PCI Express Gen3 x8 Merged Design. The design combines multiple designs required for the PCI SIG Gen3 compliance testing.

For Gen2 x8 Merged Design, please click link below

  1. REDIRECT PCI SIG Gen2 x8 Merged Design - Stratix V


  • All in one Stratix V Gen3 x8 design for the PCI SIG compliance testing
  1. 14.1 design passed through the preliminary PCI SIG compliance testing ( Inter-op test, Configuration test and basic transmitter test) .
  2. For full compliance tested design, please refer to 13.1 design
  • Targets the Stratix V GX Development Kit
  • Based on the Stratix V Gen3 x8 Avalon-ST 256-bit Design


  • ACDS 14.1
  • Altera PCI Express Stratix V GX Development Kit
  • Refer to the attached User Guide for additional software and hardware requirements

Link to User Guide and Project Archive

User Guide

Refer to the link below for guidelines on using the Merged Design


Project Archive

Refer to the link below for the project archive for the design



Personal tools